Outstanding Features:
SMOOTH SURFACE: Good spread, providing a smooth and smooth paint layer
HIGH COVERAGE: Good coverage ability, helps hide surface imperfections better
EASY TO CLEAN: Helps clean stubborn stains easily, leaving the wall surface as clean as new.
Direction for Use:
Surface Preparation
The surface must be dry and clean before painting (the maximum moisture content for the wall surface is 16%), with no peeling, chalking, or scratches. For the best results, apply one coat of Anti-Alkali Primer and two coats of Nano Matrix Full Coverage Paint.
Application
The product is easily applied with a paintbrush, roller, or spray gun.
Dilution
The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of 5%..
Paint Coverage
Coverage on normal smooth surface is approximately 9 – 12 m2/ liter per coat.
Drying Time
Nomal dry to touch time is 30minutes. Ensure adequate drying before recoating (minimum 2 hours).
Storage System
The product must be stored in accordance with national regulations. Storge conditions are to keep the containers in a dry, cool, well ventilated space and away.
Safety
Keep out of reach of children. This product has no known significant effect of critical hazards
For more information on product usage recommendation, kindly refer to our Technical Data Sheet.
If the paint is tinted from Multicolor base using the Multicolor Computerized Tinting Machine, the amount of tinters added to this can depend on the colours and the final volume is close to the indicated volume.
Information about Safety, health & environment
Chemical identification code: See information on safety data sheet. See safety information instructions before use. Keep out of reach of children. If inhaled: remove to fresh air. If swallowed, seek medical assistance immediately. If on skin: wash with soap and water. Remove contaminated clothing and wash before reuse. If contact occurs, immediately rinse with water and seek medical assistance. Avoid releasing paint into the environment. Do not pour paint into sewers or water sources. Dispose of used paint and paint cans according to national waste treatment regulations.
Ingredients:
Specialized base resin (25 – 55%), Mineral powder & Pigment (10 – 35%), Additives (3 – 10%), Water (15 – 35%)
Expiry:
3 years from date of manufacture.
