Primer NANOMATRIX

Primer NANOMATRIX

Singcolor Primer NANOMATRIX is ​​a water-based anti-alkali modified acrylic primer product, manufactured using advanced Celina E - Fast technology. The product is not only easy to apply but also helps increase the durability of the coating. NanoMatrix resistant primer is suitable for both indoor and outdoor surfaces such as concrete, masonry and firewalls.

Outstanding Features:

HIGH ADHESION: Strengthening the adhesion between the wall surface and the paint layer helps the paint film be durable over time.

ENVIRONMENTALLY FRIENDLY: With low V.O.C content, Singcolor NanoMatrix is ​​not only safe for health but also brings a fresh living space.

ANTI-ALKALIZATION: Resists the attack of alkalinity, the main cause of discoloration, helping your walls become more durable and smoother

Direction for Use:

Surface Preparation

The substrate must be sund, clean, dry and free from dust, oil, grease, laitance etc. All tracesof foam release agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.

Application

The product is easily applied with a paintbrush, roller, or spray gun.

Dilution

The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of 5%.

Paint Coverage

Coverage on normal smooth surface is approximately 8.8 – 11.6m2/liter per coat.

Drying Time

Nomal dry to touch time is 30minutes. Ensure adequate drying before recoating (minimum 2 hours).

Storage System

The product must be stored in accordance with national regulations. Storge conditions are to keep the containers in a dry, cool, well ventilated space and away.

Safety

Keep out of reach of children. This product has no known significant effect of critical hazards

For more information on product usage recommendation, kindly refer to our Technical Data Sheet.

If the paint is tinted from Multicolor base using the Multicolor Computerized Tinting Machine, the amount of tinters added to this can depend on the colours and the final volume is close to the indicated volume.

Information about Safety, health & environment

Chemical identification code: See information on safety data sheet. See safety information instructions before use. Keep out of reach of children. If inhaled: remove to fresh air. If swallowed, seek medical assistance immediately. If on skin: wash with soap and water. Remove contaminated clothing and wash before reuse. If contact occurs, immediately rinse with water and seek medical assistance. Avoid releasing paint into the environment. Do not pour paint into sewers or water sources. Dispose of used paint and paint cans according to national waste treatment regulations.

Ingredients:

Specialized base resin (25 – 35%), Mineral powder & Pigment (30 – 40%), Additives (3 – 10%), Water (30 – 40%)

Expiry:

3 years from date of manufacture.